Browse all practice questions for the Clover Learning Physics Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Clover Learning Physics Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What term describes the smallest unit of information within a digital image?
  • How do ascites affect the subject contrast of the abdomen?
  • What are three factors that affect spatial resolution in digital radiography?
  • For two point charges of opposite sign, the electric potential energy of the system is
  • A 1.0 kg object moves at 1.0 m/s. What is its de Broglie wavelength?
  • For imaging the thoracic spine, which projection provides increased spatial resolution and decreased OID?
  • A 2 kg block is lifted by 5 m. What work is done against gravity?
  • How can a technologist improve spatial resolution with respect to focal spot size?
  • How does increased kilovoltage peak (kVp) affect the proportion of scatter radiation striking the image receptor?
  • Which projection of the calcaneus uses a 40-degree angle to produce elongation?
  • A person pushes on a wall with a force of 200 N. What force does the wall exert on the person?
  • A 0.5 kg block of ice at 0°C is heated and completely melts. If the latent heat of fusion is 334 kJ/kg, how much energy is required?
  • Which aspects of the image receptor influence spatial resolution?
  • Two equal masses m = 1 kg, one moving at 2 m/s collides elastically with the other at rest along the same line. After collision, what are their velocities?
  • In a patient with ascites, the decreased subject contrast likely leads to what effect on visibility of anatomical detail?
  • How does increasing the source-to-image distance (SID) affect size distortion in radiography?
  • Which projection is associated with elongation of the skull when an axial angle is used?
  • A long straight wire carries a current of 5 A. At a distance of 3 cm, what is the magnetic field? Use μ0 = 4π×10^-7.
  • Between 0.5 mm and 0.1 mm DELs, which provides higher spatial resolution?
  • Shape distortion is related to misalignment or angulation of which three components?
  • What is used to test a monitor's spatial resolution?
  • Which projection reduces OID and improves spatial resolution for thoracic imaging?
  • A 0.5 kg piece of metal with c = 400 J/kg·K is heated by 200 K. How much energy is added?
  • A rod of length 1.0 m has a linear expansion coefficient α = 12×10^-6 /°C. If the temperature increases by ΔT = 30°C, by how much does the length change?
  • What SID is considered the standard baseline to minimize magnification in radiography?
  • A radioactive sample has a half-life of 3 years. What fraction remains after 9 years?
  • Which image processing factor influences radiographic image contrast?
  • Which part of the x-ray beam contains signal intensities corresponding to the anatomy represented on the image receptor?
  • What is a radiographic histogram?
  • If SID is 60 inches and SOD is 45 inches, what is the magnification factor?
  • Increasing which factor related to distance will increase spatial resolution?
  • Which image quality factor is defined as the structural sharpness recorded in a radiographic image?
  • What is the centripetal acceleration for a vehicle moving at 20 m/s around a circular path of radius 40 m?
  • How does an increased object-to-image distance (OID) caused by a fracture affect the resulting radiograph?
  • In a one-dimensional elastic collision between a 3 kg block moving at 2 m/s and a stationary 4 kg block, what are their velocities after collision?
  • What type of shape distortion results when the anatomy is parallel to the IR but the x-ray beam is angled?
  • If magnification factor equals SID/SOD and SID is 50 inches with a magnification of 1.25, what is the SOD?
  • Which statement describes low-contrast images?
  • Which focal spot size yields the highest spatial resolution: 0.6 mm or 2.0 mm?
  • Two point charges q1 = 2 μC and q2 = -3 μC are separated by r = 0.05 m. What is the electric potential energy of the system? (Use k = 8.99×10^9 N·m^2/C^2.)
  • How is image contrast defined?
  • Which projection is known to produce elongation of the skull when using an axial angle?
  • If intensity is 1×10^-6 W/m^2 and reference intensity is 1×10^-12 W/m^2, what is the sound level β?
  • If 10 J of work is done in 2 s, what is the average power?
  • An RC circuit has R = 1 kΩ and C = 10 μF. What is the time constant τ, and what is the meaning?
  • A 1500 kg car travels around a level curve of radius 40 m at 20 m/s. What friction force is required to provide the centripetal acceleration?
  • Which magnification factor results in the greatest amount of size distortion?
  • Which post-processing factor affects the displayed image contrast?
  • How many shades of gray can one monitor pixel display at a time?
  • A capacitor with capacitance C = 0.5 μF is charged to voltage V = 6 V. What is the energy stored in the capacitor?
  • A 3 kg mass is raised by 4 m. What is the gain in gravitational potential energy (g = 9.8 m/s^2)?
  • What happens to the size of individual pixels when the matrix size of a digital image increases?
  • How does an increased grid ratio affect radiographic image contrast?
  • Which factor should be adjusted to visualize fine fractures more clearly in digital radiography?
  • Which two variables affect the spatial resolution recorded in the radiographic image?
  • What is the average velocity during the 5 s interval of the velocity ramp from 0 to 20 m/s?
  • Which material tends to produce the lowest remnant beam signal due to high attenuation properties?
  • Which computer processing features influence radiographic image contrast?
  • A capacitor stores charge Q = 3 μC at V = 6 V. What is its capacitance?
  • Which matrix size is associated with the highest spatial resolution: 1024 x 1024 or 2048 x 2048 matrix?
  • Which feature of abdominal radiographs can make visualization of individual anatomy and pathology more difficult?
  • A single loop of wire with N = 1 is exposed to a uniform magnetic field changing such that the flux Φ = B A; If B is increasing at rate dB/dt = 0.8 T/s and area A = 0.5 m^2, what is the induced emf?
  • What defines high contrast?
  • A thin converging lens has focal length f = 0.20 m. An object is placed at distance u = 0.30 m from the lens. Use the lens formula 1/f = 1/v + 1/u to find the image distance.
  • A 5 kg object moves with velocity 8 m/s. What is its kinetic energy?
  • How does an air-filled bowel obstruction affect the subject contrast of the abdomen?
  • Which two projections use shape distortion (elongation) to improve visualization?
  • If the distance from a point charge is doubled, how does the electric field change relative to its original value?
  • A car starts from rest and accelerates at 4 m/s^2 for 6 s. What is its final velocity and the displacement during that interval?
  • A wheel of radius 0.5 m has an angular acceleration of 2 rad/s^2 and starts from rest. After 3 s, what is its angular velocity?
  • What is gray-scale?
  • What are the two specific types of shape distortion?
  • A block of ice melts completely with mass 0.75 kg using Lf = 334 kJ/kg. How much energy is required?
  • What term describes the smallest unit of information within a digital image?
  • A light ray travels from air into water with angle of incidence 30 degrees. Using Snell's law, what is the angle in water?
  • A 0.3 kg piece of metal with specific heat capacity c = 500 J/kg·K is heated by 100 K. How much energy is added?
  • Which statement best describes high contrast?
  • Which distance factor, when increased, will increase spatial resolution?
  • What is the magnification factor formula when using image size and object size?
  • What type of shape distortion occurs when the bone is angled but the central ray is perpendicular?
  • Which factor will produce a monitor capable of displaying greater spatial resolution?
  • A car makes a horizontal circular path of radius 50 m at a constant speed of 15 m/s. What is the centripetal acceleration?
  • lp/mm stands for line pairs per millimeter. Which option correctly expands 'lp'?
  • If the detector element (DEL) size is decreased while keeping pitch constant, what is the expected effect on spatial resolution?
  • A charge q = 2 μC moves with velocity v = 3×10^5 m/s perpendicular to a uniform magnetic field B = 0.5 T. What is the magnetic force on the charge?
  • Which statement describes a radiographic histogram in simple terms?
  • If the SID doubles while the SOD remains constant, what happens to the magnification factor?
  • A 1.0 kg object moves at 1.0 m/s. What is its momentum?
  • Why does increasing subject contrast improve the visibility of anatomy and pathology?
  • Which change would most directly improve spatial resolution of the imaging system?
  • Two resistors 6 Ω and 3 Ω are in parallel across a 12 V source. What is the equivalent resistance and current from the source?
  • Which statement best describes the relationship between OID and spatial resolution?
  • Two coherent sources separated by distance such that at a point they have a path difference of λ/2. What kind of interference occurs there?
  • What is the effect of decreasing kilovoltage peak (kVp) on the remnant beam signal differences between tissues?
  • A 3 kg block moving at 2 m/s collides elastically with a stationary 1 kg block. After the collision, what are the velocities of the two blocks?
  • At constant volume, if a gas's pressure doubles, what happens to its temperature? (Assume ideal gas behavior.)
  • What kind of image contrast do large signal differences in the remnant beam produce?
  • What are the four patient factors related to spatial resolution?
  • If the plate area of a parallel plate capacitor is doubled while the separation remains the same, what happens to its capacitance?
  • What is the formula for calculating the source-to-object distance (SOD)?
  • Pneumothorax on a chest radiograph most directly increases subject contrast due to air in the pleural space; which statement best describes this effect?
  • A wall has thickness L = 0.05 m, cross-sectional area A = 2.0 m^2, thermal conductivity k = 0.8 W/m·K, and ΔT = 20 K across it. What is the rate of heat transfer by conduction?
  • What DEL pitch size is preferred to increase spatial resolution?
  • Which term describes the standard used to map computed radiography grayscale levels to a perceptually uniform display on monitors?
  • Which arrangement yields elongation when the anatomy is parallel to the image receptor and the beam is angled?
  • What is the purpose of decreasing focal spot size in radiography?
  • In the photoelectric effect, if you increase the light intensity while the frequency is above threshold, what happens to the number of emitted electrons and to their maximum kinetic energy?
  • For an imaging setup with a 2 mm effective focal spot, 2-inch OID, and 40-inch SID, what is the focal spot blur?
  • What describes the contrast and brightness calibration of the display monitor?
  • A heat engine operates between a hot reservoir at 500 K and a cold reservoir at 300 K. What is the maximum theoretical efficiency?
  • Which angle is not considered part of beam geometry?
  • In a one-dimensional elastic collision, a 5 kg block moving at 2 m/s collides with a stationary 1 kg block. What are their velocities after collision?
  • Which parameter, when increased, contributes to both decreased spatial resolution and increased penumbra?
  • How many pixels are in a 2MP (megapixel) monitor?
  • Which skull projection is used to produce elongation with an axial angle?
  • Which DEL size provides higher spatial resolution: 0.1 mm or 0.5 mm?
  • A torque of 2 N·m is applied to a body with moment of inertia 0.4 kg·m^2. What angular acceleration is produced?
  • Which projection results in foreshortening of the anatomy?
  • Three resistors 3 Ω, 2 Ω, and 5 Ω are in series connected to a 20 V source. What is the current, and what is the voltage drop across the 5 Ω resistor?
  • A block of mass 5 kg has density 600 kg/m^3 and is submerged in water (density 1000 kg/m^3). What fraction of its volume is submerged?
  • Which change is most likely to increase radiographic image contrast?
  • Which component of digital radiography receptors is responsible for capturing the radiation signal transmitted through the patient?
  • Which combination of OID and SID produces the highest spatial resolution: 1 inch OID/72 inch SID or higher OID/lower SID?
  • Which of the following is the unit of capacitance?
  • How can a technologist reduce magnification when a long OID is unavoidable?
  • Which statement is true regarding grid ratios and image contrast?
  • Which statement is true regarding the relationship between matrix size and pixel size when the overall field of view is fixed?
  • If you decrease the source-to-image distance (SID), what happens to spatial resolution?
  • A force of 50 N is applied uniformly on an area of 0.01 m^2. What is the pressure?
  • Which set of DEL characteristics would most likely provide the best spatial resolution?
  • Which image quality factor is defined as the structural sharpness recorded in the radiographic image?
  • How does increased matrix size affect the spatial resolution of a digital image?
  • What do large visible differences in brightness represent?
  • A point charge q = 5 μC is located at r = 0.2 m away from a point of interest. Assuming vacuum permittivity, what is the magnitude of the electric field due to this charge at that point?
  • If the current in a long straight wire doubles, what happens to the magnetic field at a fixed distance?
  • What are the two benefits of performing a thoracic spine in an AP projection instead of a PA projection?
  • A wheel with angular acceleration 2 rad/s^2 starts from rest. What is the linear acceleration of the center of mass if the wheel rolls without slipping?
  • Which combination of factors produces an image with the highest spatial resolution?
  • Which formula is used to determine the magnification factor in radiography?
  • Which object-to-image distance (OID) causes the greatest amount of penumbra: 0.5 inches or 2.0 inches?
  • When the magnetic flux through a loop increases, the induced current flows such that its own magnetic field opposes this increase. What is the rule called?
  • Which of the following is not listed as a patient-related factor affecting spatial resolution?
  • A magnification factor of 2.56 implies what about the image size relative to the object?
  • Which statement is true about matrix size and spatial resolution?
  • How is detector element (DEL) pitch defined?
  • A cube of side length 2 m has mass 56 kg. What is its density?
  • What is the distance between the anatomy being imaged and the focal spot within the x-ray tube called?
  • What is the visual appearance of patient motion on a radiograph?
  • To increase scatter reaching the image receptor, which change would be most effective?
  • A position-time graph is a straight line with slope 4 m/s. What is the object's velocity?
  • What are the two effects of increasing the object-to-image distance (OID)?
  • Which body habitus would result in the largest object-to-image distance (OID) during an abdomen radiograph?
  • Which pathological condition is most likely to increase subject contrast during a chest radiograph?
  • What primarily controls the display monitor spatial resolution?
  • What two methods should technologists use to prevent motion on a radiograph?
  • In a clavicle radiograph, switching from AP to PA projection increases spatial resolution primarily due to which factor?
  • Which DEL size is preferred to improve spatial resolution and visualize fine details like fractures?
  • The intensity of sound is 1×10^-4 W/m^2. If the threshold I0 is 1×10^-12 W/m^2, what is the sound level in decibels, β?
  • What term describes a body section that creates a remnant beam with widely varying signal intensities?
  • A wheel with radius 0.5 m and angular velocity 6 rad/s is rolling without slipping. What is the linear velocity of the center of mass?
  • What are the two effects of decreasing the source-to-image distance (SID)?
  • A person pushes on a wall with a force of 200 N. What force does the wall exert on the person?
  • Which situation results in the greatest amount of shape distortion?
  • What is the term for blurring at the edges of an object on a radiograph?
  • What are the two components of image distortion?
  • How does decreased kilovoltage peak (kVp) affect differences in signal intensity in the remnant beam?
  • Which projection uses elongation to improve visualization of the calcaneus?
  • Two coherent sources separated by a distance such that at a point their path difference is equal to one wavelength. What kind of interference occurs there?
  • What is long gray-scale synonymous with?
  • At constant volume, if the pressure of a gas doubles, what happens to the temperature (in terms of the initial temperature T1)?
  • In a closed system, the total electric charge is conserved. If the system is initially neutral, what is the total charge after any process within the system?
  • Which clinical finding would most likely decrease subject contrast on an abdominal radiograph?
  • How does decreased matrix size affect the spatial resolution of a digital image?
  • Which statement best describes the relationship between monitor pixel count and spatial resolution?
  • A projectile is launched from ground level with speed 20 m/s at 30° above the horizontal. Ignoring air resistance, what is its horizontal range?
  • A resistor of 12 Ω carries a current of 2 A. What is the voltage across it?
  • Which cranium projection results in elongation of the anatomy?
  • What does DEL stand for in digital radiography?
  • Differential attenuation describes what?
  • If a wall experiences the same ΔT, what is the conduction rate change when the area is doubled and the thickness is halved?
  • What is another term for size distortion?
  • A parallel plate capacitor has plate area 0.01 m^2 and plate separation 0.02 m. What is its capacitance in farads? ε0 = 8.85×10^-12 F/m.
  • How does increased kilovoltage peak (kVp) affect differential attenuation of the x-ray beam?
  • What defines low contrast?
  • Beam geometry in radiographic imaging is defined by which three factors?
  • If the distance from a point charge is doubled, the electric field becomes which of the following relative to its original value?
  • What is the primary factor controlling subject contrast?
  • What is the effect of a longer object-to-image distance (OID) on magnification?
  • For light going from water to air, what is the critical angle in water for total internal reflection?
  • What happens to the size of individual pixels when the matrix size decreases?
  • To maximize sharpness, which change would be true?
  • What does subject contrast in radiography refer to?
  • If 1 μg of mass is converted completely to energy, what is the energy released? Use c = 3.0×10^8 m/s.
  • Which grid ratio is associated with the highest image contrast?
  • A 2.0 kg cart is released from rest at a height of 0.8 m on a frictionless track. Ignore air resistance. What speed does it reach at the bottom?
  • In a chest exposure, the large difference in signal intensities within the remnant beam is described as?
  • Which monitor size is the minimum recommended by the American College of Radiology (ACR) for routine radiography?
  • What is the magnification factor when SID is 42 inches and OID is 10 inches?
  • If an image shows long gray-scale and many shades of gray, what is the implied contrast level?
  • Which term describes image magnification?
  • Which factor, when high, contributes to achieving the highest spatial resolution alongside small DEL size and small DEL pitch?
  • What is the result of increasing object-to-image distance (OID)?
  • What happens to spatial resolution if OID is increased?
  • How is spatial resolution measured?
  • Which anatomical part can indicate the spatial resolution recorded in a radiographic image?
  • If you keep SID constant but reduce OID significantly, what happens to magnification?
  • Which tissue or material corresponds to the highest signal intensity at the image receptor?
  • What is the distance between the x-ray source and the object called?
  • A force of 8 N is applied at a point 0.2 m from the pivot, perpendicular to the lever arm. What is the torque? If the body has moment of inertia I = 0.4 kg·m^2, what angular acceleration does this torque produce?
  • What is the most important factor influencing the contrast of the radiographic image?
  • Which law relates induced emf to rate of change of magnetic flux?
  • A 2.0 kg block of water at 20°C is heated to 30°C. With c = 4184 J/kg·K, how much energy is added?
  • What type of distortion is caused by angulation of the image receptor?
  • A wave has frequency f = 5 Hz and wavelength λ = 60 m in a medium. What is the wave speed c?
  • Which term describes the light-emitting components within display monitors?
  • What term describes the signal differences in the remnant beam?
  • Which combination of SID and OID produces the highest quality radiograph?
  • Which statement best describes the effect of increasing matrix size on pixel size when the overall field of view is kept constant?
  • A wave has frequency f = 4 Hz and wavelength λ = 12 m in a medium. What is the wave speed c?
  • Which expression gives the magnetic field around a long straight wire carrying current I at distance r?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy