In an inelastic collision, momentum is conserved while kinetic energy drops. A 2 kg block moving at 3 m/s collides with a stationary 4 kg block and sticks, producing a shared velocity. Total momentum is 6 kg·m/s, and the combined mass is 6 kg, giving a common speed of 1 m/s.

Multiple Choice

A 2 kg block moving at 3 m/s collides inelastically with a stationary 4 kg block and sticks together. What is their common velocity after collision?

Momentum is conserved in a collision where the blocks stick together, while kinetic energy is not. The first block has momentum 2 kg × 3 m/s = 6 kg·m/s, and the second block is at rest, so the total initial momentum is 6 kg·m/s. After they stick, the combined mass is 2 kg + 4 kg = 6 kg, moving with velocity v. Setting momentum before equals momentum after gives v = 6 kg·m/s ÷ 6 kg = 1 m/s. The kinetic energy drops (inefficiency of inelastic collisions): initial KE is 0.5×2×3^2 = 9 J, final KE is 0.5×6×1^2 = 3 J. So the common velocity is 1 m/s.

Why momentum matters more than pretty numbers when blocks collide

Picture two blocks on a frictionless track. One is 2 kg, moving at 3 m/s. The other is 4 kg and just sitting there. They meet, stick together, and clump into one bigger block. What speed do they co-create after their jam session? If you’re used to the elegance of conservation laws, you might feel a little like a detective: what stays the same, what changes, and why?

Let’s peel back the layers slowly and keep the vibe friendly. This is classic momentum talk—and you don’t need fancy gadgets to follow along. Just a couple of basic ideas, a little arithmetic, and a moment to breathe.

The calm principle you’ll lean on

In the world of collisions, momentum is the secret sauce that refuses to vanish in a puff of smoke. When forces act over a short time during a collision, the total momentum of the system stays constant, as long as there are no external pushes. Simple, powerful, and surprisingly stubborn in its arithmetic.

Key fact to hold onto: momentum, not kinetic energy, is the conservation hero in an inelastic collision. If objects bounce, some energy might zip away as heat or deformation, but momentum sticks around to keep the numbers honest. That’s why even though the energy tally goes down in an inelastic crash, the total momentum before and after must balance.

Set up the numbers without fear

Here’s the setup in plain terms. We have:

  • A 2 kg block moving at 3 m/s toward a stationary 4 kg block.

  • They collide and stick together, becoming a single 6 kg mass.

Step 1: compute the initial momentum

  • The moving block’s momentum is mass times velocity: p1 = m1 v1 = 2 kg × 3 m/s = 6 kg·m/s.

  • The stationary block’s momentum is zero: p2 = 4 kg × 0 m/s = 0 kg·m/s.

  • Total initial momentum = 6 + 0 = 6 kg·m/s.

Step 2: apply momentum conservation

  • After the collision, the two blocks move together as one mass of 6 kg with some common velocity v.

  • Momentum after collision = total mass × velocity = 6 kg × v.

  • Set initial momentum equal to final momentum: 6 kg·m/s = 6 kg × v.

Step 3: solve for the common velocity

  • v = 6 / 6 = 1 m/s.

So, according to the momentum book, the common velocity after the collision is 1 m/s. Sounds neat, right? It’s a clean result that emerges from the fact that the system’s total momentum doesn’t vanish or spontaneously appear.

A quick glance at energy to ground the intuition

If you’re curious about energy too (and you should be, because it reveals what’s happening under the hood), you can compare kinetic energy before and after.

  • Initial kinetic energy: KE_initial = 1/2 m v^2 = 1/2 × 2 kg × (3 m/s)^2 = 1 × 9 = 9 J.

  • Final kinetic energy: KE_final = 1/2 (m1 + m2) v^2 = 1/2 × 6 kg × (1 m/s)^2 = 3 J.

That's a drop from 9 joules to 3 joules. The missing 6 J isn’t lost to nothing; it usually goes into deforming the blocks, heating them, and tiny vibrations—the telltale signs of an inelastic collision. The momentum, however, stays constant. It’s the energy that does the emotional work here.

Where a lot of intuition trips people up

If you scan the multiple-choice options and notice 1.5 m/s hiding in the list, you might wonder what extra trick could push the velocity higher. Here’s a common moment of confusion and how to avoid it:

  • Remember the total mass after sticking is the sum of both blocks. In this case, 2 kg + 4 kg = 6 kg. Whatever the speed is after they lock together, it’s going to be that initial momentum divided by 6 kg.

  • The initial momentum, as we calculated, is 6 kg·m/s. Divide by 6 kg, you get 1 m/s. No hidden escalator there; the math is straightforward.

Sometimes people accidentally mix up which mass you use in the denominator, or they drop a decimal point and land on something like 1.5 m/s. Keep the mental checklist simple:

  • Is there sticking? Yes → treat as a single combined mass after impact.

  • Is momentum conserved? Yes → use total initial momentum and total final mass.

  • Are there external forces? On a frictionless track, the answer is “no” for a good moment.

A moment to connect with a real-world intuition

Think about two ice skaters on a rink who hold hands mid-spin. If one skater is heavier and moving faster toward the other, once they grab hands and spin together, the heavier one might drag the lighter one’s speed down a bit, or the lighter one might speed up the heavier one’s pace. In the end, what preserves is the total “push” they've exchanged through the contact—momentum. They don’t magically create a new amount of momentum just because they’ve joined forces. They simply share the momentum that was already there, redistributed across the new, bigger mass.

A friendly detour into why this matters beyond the problem

Momentum conservation isn’t a quirky trick; it’s a backbone principle in physics. It shows up in car collisions on a highway with airbags and crumple zones where engineers design structures to absorb energy while keeping momentum in check. It’s why baseball players sometimes see the ball accelerate after a bat tap, not because energy is invented, but because the contact reshapes how mass and velocity mingle for a moment. It even nudges astrophysicists when they consider cosmic collisions or the behavior of particles in high-energy accelerators. The same rule—momentum’s stubborn invariance—keeps showing up, just in different costumes.

What to remember when you’re faced with similar problems

  • Identify the system: which objects are interacting, and is there any external force to consider? On a smooth track, external horizontal forces are negligible during the impact.

  • Check whether the objects stick or bounce. If they stick (perfectly inelastic collision), you treat them as a single mass after impact.

  • Compute the initial momentum: sum up m v for all pieces (taking care with signs if directions matter).

  • Use conservation of momentum: total initial momentum equals total final momentum.

  • Solve for the unknown velocity: divide the initial total momentum by the final total mass.

  • Compare energies if you want a bonus insight: kinetic energy often drops in inelastic events as some energy goes into deformation and heat.

Bringing it back to the core idea

In this little collision, the math lands on 1 m/s for the shared velocity after impact. The velocity is elegant in its simplicity because momentum, not energy, is the keeper of the truth in this scenario. The energy story tells a separate tale about where energy goes, but the momentum tally remains fixed through the snap of the collision.

If you’re ever tempted to treat momentum as only a dry algebra exercise, pause for a moment and picture the two blocks, now united, gliding along the track at a modest 1 m/s. The number feels almost poetic: mass times speed, a compact product of two simple facts that together describe a real, physical change in motion. And that’s the beauty of physics, isn’t it? Tiny calculations that reveal how the world rebalances every time two bodies touch and decide to travel forward as a team.

One last thought—watch the signage

Direction matters in momentum. If the 3 m/s block had been moving in a negative direction (say −3 m/s) toward the stationary block, the initial momentum would be −6 kg·m/s, and the final velocity would be −1 m/s. It’s all about the vector nature of momentum: speed is real, but velocity carries direction along for the ride.

If you enjoy this kind of grounding, you’re not alone. Physics loves these clean, truth-telling moments where a couple of equations slice through complexity and give you a clear, testable understanding of what happens when forces collide—literally. And yes, the numbers can be a tiny bit stubborn, but with the method in your pocket, you’ll navigate them with a calm confidence that feels almost practical, like you’re a mechanic or an engineer, quietly scripting the motion of objects in the world.

Final takeaway, plain and simple: the common velocity after the collision is 1 m/s, because momentum is conserved and the total mass after sticking is 6 kg. The energy story tells a separate tale of loss—heat, deformation, and the like—but momentum keeps its steady course, whispering the true outcome in a way that’s as fundamental as it is satisfying.